CONTACT US Los Angeles Orthopaedic Hospital

Back to: Los Angeles Orthopaedic Hospital Alliance with the University of California Los Angeles - Research

J. Vernon Luck, Sr., M.D. Orthopaedic Research Center
Publication List

  • 1. McKellop, H. A.: Wear of artificial joints materials II:Correlation of experimental and clinical results. Engineering in Medicine, 10: 123-136, 1981.
  • 2. McKellop, H. A.; Clarke, I. C.; Markolf, K.; and Amstutz, H. C.: Friction and wear properties of polymer, metal and ceramic prosthetic joint materials evaluated on a multi-channel screening device. J. Biomed. Mat. Res. 15: 619-653, 1981.
  • 3. Clarke, I.; McKellop, H. A.; McGuire, P.; Okuda, R.; and Sarmiento, A.: Wear of Ti-6A1-4V implant alloy and ultrahigh molecular weight polyethylene combinations. In: Titanium alloys in Surgical Implants. Edited by H. Luckey and F. Kubli, ASTM STP 796, ASTM Philadelphia 136-147, 1983.
  • 4. Ebramzadeh, E.; Mina-Araghi, M.; Clarke, I. C.; and Ashford, R.: Loosening of well-cemented total hip femoral prosthesis due to creep of the cement. In 'Corrosion and degradation of implant materials.' Edited by Fraker, A. C. and Griffin, D.G., ASTM STP 859, ASTM Philadelphia, PA, pp. 373-399, 1983.
  • 5. McKellop, H. A., and Clarke, I. C.: Evolution and evaluation of materials screening machines and joints simulators in predicting in-vivo wear phenoomena. In: Functional Behavior of Orthopaedic Biomaterials. Edited by P. Ducheyne and G. Hastings, CRC Press, Boca Raton, 51-85. Edited by Hastings, P. D. a. G., 51-85, 1984.
  • 6. McKellop, H. A., and Clarke, I. C.: Degradation and wear of ultrahigh molecular weight polyethylene. In: Corrosion and Degradation of Implant Materials. Edited by A. Fraker and C. Griffin, ASTM STP 859, ASTM Philadelphia, 1985.
  • 7. Clarke, I. C., and McKellop, H. A.: Wear testing. In Handbook of Biomaterials Evaluation. Edited by A. Von Recum, Macmillan, New York, 114-130, 1986.
  • 8. Eyerer, P.; Kurth, M.; McKellop, H. A.; and Mittlmeier, T.: Characterization of UHMWPE Hip cups run on joint simulators. J. Biomed Materials Research, 21: 275-291, 1987.
  • 9. McKellop, H. A.; Ebramzadeh, E.; Sarmiento, A.; and Niederer, P.: Stem-bone micromotion in non-cemented hip prostheses. Advances in Biomaterials, 7, Biomaterials and Clinical Applications. Edited by A. Pizzoferrato, et al, Elsevier, Amsterdam, 155-160, 1987.
  • 10. McKellop, H. A.; Ebramzadeh, E.; Fortune, J.; and Sarmiento, A.: Stability of subtrochanteric femoral fractures fixed with interlocking intramedullary rods. In " Intramedullary Rods: Clinical Performance and Related Laboratory Testing" ASTM STP 1008, Edited by Harvey, J. P., Daniels, A.U. and Games, R. F., ASTM, Philadelphia, 1988, 65-79.
  • 11. Weinstein, J. N.; Oster, D. M.; Park, J. B.; Park, S. H.; and Loening, S.: The effect of the extracorporeal shock wave lithotriptor treatment on the bone-cement interface in dogs. Clin. Orthop., 235: 261-267, 1988.
  • 12. Hethrington, V. J.; Park, S. H.; Carnett, J. A.; Patterson, B. A.; Bratkiewicz, L.; and Kessler, D. A.: The effects of fibrin sealant on the fixation of porous titanium and pyrolytic carbon implants. J. Foot Surg. 28: 145-150, 1989.
  • 13. Krause, W. R.; Park, S. H.; and Straup, R.: Mechanical properties of BIS-GMA resin short fiber composites. J. Biomed. Mat. Res., 23: 1195-1211, 1989.
  • 14. Röstlund, T.; McKellop, H. A.; Albrektsson, B.; and Albrektsson, T.: Wear of ion-implanted pure titanium against UHMWPE. Biomaterials, 10, 176-81, 1989.
  • 15. Gellman, H.; Hume, M.; McKellop, H. A.; and Brumfield, Jr., R.H.: Functional range of motion of the joints of the hand. J. Hand Surgery, 15-A (2), 240-243, 1990.
  • 16. Howie, D. W.; Campbell, P. A.; McGee, M.; and Cornish, B. L.: Wagner resurfacing hip arthroplasty. The results of one hundred consecutive arthroplasties after eight to ten years. J Bone Joint Surg Am, 72(5): 708-14, 1990.
  • 17. Hume, M. C.; Gellman, H.; McKellop, H. A.; and Brumfield, R. H., Jr.: Functional range of motion of the joints of the hand. J Hand Surg Am, 15(2): 240-3, 1990.
  • 18. Lausmaa, J.; Röstlund, T. V.; and McKellop, H. A.: A surface spectroscopic study of N-implanted Ti and Ti6A14V wear against UHMWPE. Surface and Interface Analysis, 15, 328-336, 1990.
  • 19. McKellop, H. A., and Röstlund, T. V.: The wear behavior of ion-implanted Titanium alloy against UHMW polyethylene. J Biomed Mater Res, 24(11): 1413-1425, 1990.
  • 20. McKellop, H. A.; Sarmiento, A.; Schwinn, C. P.; and Ebramzadeh, E.: In vivo wear of titanium-alloy hip prostheses. J Bone Joint Surg, 72-A, No. 4, 512-517, 1990.
  • 21. Nasser, S.; Campbell, P. A.; Kilgus, D.; Kossovsky, N.; and Amstutz, H. C.: Cementless total joint arthroplasty prostheses with titanium-alloy articular surfaces. A human retrieval analysis. Clinical Orthopaedics and Related Research, 261: 171-85, 1990.
  • 22. Sarmiento, A.; Ebramzadeh, E.; and McKellop, H. A.: Total hip arthroplasty with cement. A long-term radiographic analysis in patients who are older than fifty and younger than fifty years. J Bone Joint Surg Am, 72(10): 1470-1476, 1990.
  • 23. Sarmiento, A.; Gogan, W. J.; Ebramzadeh, E.; and McKellop, H. A.: Cup containment and orientation in cemented total hip arthroplasties. J Bone Joint Surg Br, 72-B: 996-1002, 1990.
  • 24. Amstutz, H. C.; Campbell, P. A.; and Gruen, T.: Modes of failure of conventional stem type hip replacements. In Hip Arthroplasty, pp. 473-486. Edited by Amstutz, H. C., 473-486, New York, Churchill Livingstone, 1991.
  • 25. Amstutz, H. C.; Campbell, P. A.; Nasser, S.; and Kossovsky, N.: Modes of Failure of Surface Replacements. In Hip Arthroplasty, pp. 507-534. Edited by Amstutz, H. C., 507-534, New York, Churchill Livingstone, 1991.
  • 26. Campbell, P. A.: Role of calcium phosphate ceramics in joint replacement. In Hip Arthroplasty, pp. 357-370. Edited by Amstutz, H. C., 357-370, New York, Churchill Livingstone, 1991.
  • 27. Campbell, P. A.; Clarke, I. C.; and Kossovsky, N.: Clinical significance of wear debris. In Hip Arthroplasty, pp. 555-570. Edited by Amstutz, H., 555-570, New York, Churchill Livingstone, 1991.
  • 28. Hoffmann, R.; McKellop, H. A.; Sarmiento, A.; Lu, B.; and Ebramzadeh, E.: [Three-dimensional measurement of fracture gap motion. Biomechanical study of experimental tibial fractures with anterior clasp fixator and ring fixator]. Unfallchirurg, 94(8): 395-400, 1991.
  • 29. Hoffmann, R.; McKellop, H. A.; Sarmiento, A.; Lu, B.; and Ebramzadeh, E.: Drediminesionale Messung von Frankturspalt-bewegungen Unterschenkelfrakturen mit ventralem Klammer-fixateur und Ringfixateur. Unfallchirurg, 94(8): 395-400, 1991.
  • 30. Kossovsky, N. et al.: Periprosthetic chronic imflammation characterized through the measurement of superoxide anion production by synovial-derived macrophages. Clinical Orthopaedics and Related Research, 263: 263-271, 1991.
  • 31. Kuschner, S. H.; Orlando, C. A.; McKellop, H. A.; and Sarmiento, A.: A comparison of the healing properties of rabbit Achilles' tendon injuries at different levels. Clin Orthop Rel Res, No. 272, 268-272, 1991.
  • 32. Llinas, A.; Sarmiento, A.; Ebramzadeh, E.; Gogan, W. J.; and McKellop, H. A.: Total hip arthroplasty after failed hemi-arthroplasty and mould arthroplasty. J Bone Joint Surg Br, 73-B (6), 902-907, 1991.
  • 33. McKellop, H. A.: Metallic Wear in Total Knee Replacements. In: Controversies of Total Knee Arthroplasty. Edited by V. Goldberg, Raven Press, New York, Chapter 5, 51-60, 1991.
  • 34. McKellop, H. A.; Ebramzadeh, E.; Niederer, P. G.; and Sarmiento, A.: Comparison of the stability of press-fit hip prosthesis femoral stems using a synthetic model femur. J Orthop Res, 9, 297-305, 1991.
  • 35. McKellop, H. A.; Sigholm, G.; Redfern, F. C.; Doyle, B.; Sarmiento, A.; and Luck, J. V., Sr.: The effect of simulated fracture-angulations of the tibia on cartilage pressures in the knee joint. J Bone Joint Surg Am, 73-A(9),1382-91, 1991.
  • 36. Park, J. B.; Park, S. H.; Weinstein, J. N.; and Loening, S.: Application of extracorporeal shock wave Lithotriptor (ECSWL) in orthopaedics. I. Foundations and Overview. J. Applied Biomaterials. 2(2): 115-126, 1991.
  • 37. Park, J. B.; Park, S. H.; Weinstein, J. N.; and Loening, S.: Application of extracorporeal shock wave Lithotriptor (ECSWL) in orthopaedics. II. Dose-response and pressure distribution measurements. J. Applied Biomaterials, 2(3): 161-170, 1991.
  • 38. Park, S. H.: Letter to the Editor. J. Applied Biomaterials, 2(4): 287, 1991.
  • 39. Park, S. H.; Park, J. B.; Weinstein, J. N.; and Loening, S.: Application of extracorporeal shock wave lithotriptor (ECSWL) in orthopaedics. J. Applied Biomaterials, 2(2): 145-150, 1991.
  • 40. Rankin, G.; Kuschner, S. H.; Orlando, C.; McKellop, H. A.; Brien, W. W.; and Sherman, R.: A biomechanical evaluation of a cannulated compressive screw for use in fractures of the scaphoid. J Hand Surg Am, 16A (6), 1002-1010, 1991.
  • 41. Weinstein, J. N.; Loening, S.; Park, S. H.; Park, J. B.; and Oster, D.: Application of extracorporeal shock wave Lithotripter (ECSWL) in orthopedics. III. In vitro and In Vivo studies. J. Applied Biomaterials, 2(3): 171-182, 1991.
  • 42. Kossovsky, N.; Liao, K.; Gelman, A.; and Campbell, P. A.: Photon correlation spectroscopic analysis of submicron particulate in human synovial tissues recovered at arthroplasty or revision. In Biocompatibility of Particulate Implant Materials. Edited by St. John, K., Philadelphia, American Society for Testing and Materials, 1991.
  • 43. Amstutz, H. C.; Campbell, P. A.; Clarke, I. C.; and Kossovsky, N.: Mechanism and clinical significance of wear debris-induced osteolysis. Clinical Orthopaedics and Related Research, 276: 7-18, 1992.
  • 44. Bradley, G. W.; Freeman, M. A. R.; Tuke, M. A.; and McKellop, H. A.: All-Polymer Total Knee Replacement. The American Journal of Knee Surgery, 5(1), 3-8, 1992.
  • 45. Campbell, P. A., and Amstutz, H. C.: The need for improved bearing surfaces: A clinical perspective/. In Surface Modification Technologies, pp. 15-24. Edited by Sadarshan, T., and Braza, J., 15-24, Caambridge UK, University Press, 1992.
  • 46. Clarke, I. C.; Campbell, P. A.; and Kossovsky, N.: Debris-mediated osteolysis - A cascade phenomenon involving motion, wear, particulates, macrophage induction and bone lysis. In Particulate Debris From Medical Implants, pp. 7-26. Edited by St. John, K., 7-26, Philadelphia, American Society for Testing and Materials, 1992.
  • 47. Kilgus, D. J.; Funahashi, T. T.; and Campbell, P. A.: Massive femoral osteolysis and early disintegration of a polyethylene-bearing surface of a total knee replacement. A case report. Journal of Bone and Joint Surgery. American Volume, 74A(5): 770-774, 1992.
  • 48. Kossovsky, N.; Liao, K.; Gelman, A.; Campbell, P. A.; Amstutz, H. C.; Finerman, G. A. M.; Nasser, S.; and Thomas, B.: Photon correlation spectroscopy analysis of the submicrometre particulate fraction in human synovial tissues recovered at arthroplasty or revision. In Particulate Debris From Medical Implants, pp. 68-74,. Edited by St. John, K., 68-74,, Philadelphia, American Society for Testing and Materials, 1992.
  • 49. Kuschner, S. H.; Ebramzadeh, E.; Johnson, D.; Brien, W. W.; and Sherman, R.: Tinel's sign and Phalen's test in carpal tunnel syndrome. Orthopedics, 15(11): 1297-302, 1992.
  • 50. Lausmaa, J.; Röstlund, T.; and McKellop, H. A.: Wear of ion-implanted pure titanium and Ti-6A1-4V alloy against UHMWPE. Surface Modification Technologies, V, edited by T.S. Sudarshan and J.F. Braza. The Institute of Materials, 1992.
  • 51. McKellop, H. A.; Sarmiento, A.; Brien, W.; and Park, S. H.: Interface corrosion of a modular head total hip prosthesis. J Arthroplasty, 7(3): 291-294, 1992.
  • 52. Nichter, L. S.; Yazdi, M.; Kosari, K.; Sridjaja, R.; Ebramzadeh, E.; and Nimni, M. E.: Demineralized bone matrix polydioxanone composite as a substitute for bone graft: a comparative study in rats. J Craniofac Surg, 3(2): 63-9, 1992.
  • 53. Sarmiento, A.; Ebramzadeh, E.; Brys, D.; and Tarr, R.: Angular deformities and forearm function. J Orthop Res, 10(1): 121-33, 1992.
  • 54. Sigholm, G.; Gendler, E.; McKellop, H. A.; Marshall, G. J.; Moore, T. M.; and Sarmiento, A.: Graft perforations favor osteoinduction. Acta Orthop Scand, 63(2), 177-182, 1992.
  • 55. Bradley, G.; Freeman, M. A.; Tuke, M. A.; and McKellop, H. A.: Evaluation of Wear in an All-Polymer/Total Knee Replacement. Part 2: Clinical Evaluation of Wear in a Polyrthylene on Polyacetal Total Knee. Clinical Materials, 12: 127-132, 1993.
  • 56. Llinas, A.; McKellop, H. A.; Marshall, G. J.; Sharpe, F.; Lu, B.; Kirchen, M.; and Sarmiento, A.: Healing and remodeling of articular incongruities in a rabbit fracture model. J Bone Joint Surgery 75-A (10): 1508-1523, 1993.
  • 57. McKellop, H. A.; Hoffmann, R.; Sarmiento, A.; and Ebramzadeh, E.: Control of motion of tibial fractures with use of a functional brace or an external fixator. J Bone Joint Surgery, 75-A (7): 1019-1025, 1993.
  • 58. McKellop, H. A.; Röstlund, T. V.; and Bradley, G.: Evaluation of wear in an all-polymer total knee replacement-Part 1: laboratory testing of polyethylene on polyacetal bearing surfaces. Clin Mater, 12: 117-126, 1993.
  • 59. Rao, S.; McKellop, H. A.; Chao, D.; Schildhauer, T. A.; Gendler, E.; and Moore, T. M.: Biomechanical comparison of bone graft used in anterior spinal reconstruction. Clin Orthop Relat Res, 289: 131-135, 1993.
  • 60. Rao, S.; Schildhauer, T.; McKellop, H. A.; Gendler, E.; and Moore, T. M.: Biomechanical assessment of surface demineralized micro-perforated femoral diaphyseal segmental allograft. Clin Mater, 12, 25-29, 1993.
  • 61. Amstutz, H. C.; Grigoris, P.; Safran, M. R.; Grecula, M. J.; Campbell, P. A.; and Schmalzried, T. P.: Precision-fit surface hemiarthroplasty for femoral head osteonecrosis. Long-term results. Journal of Bone and Joint Surgery. British Volume, 76B(3): 423-427, 1994.
  • 62. Campbell, P. A.; Ma, S.; Schmalzried, T. P.; and Amstutz, H. C.: Tissue digestion for wear debris particle isolation. Journal of Biomedical Materials Research, 28(4): 523-526, 1994.
  • 63. Campbell, P. A.; Dorey, F. J.; McKellop, H. A.; Park, S. H.; and Amstutz, H. C.: Comparison of UHMWPE particles from total hip replaements with alumina ceramic and cobalt chrome femoral heads. Submitted, 1994.
  • 64. Ebramzadeh, E.; McKellop, H. A.; Dorey, F. J.; and Sarmiento, A.: Challenging the validity of conclusions based on P-values alone: a critique of contemporary clinical research design and methods. Chapter 60, Instructional Course Lectures, Vol 43, American Academy of Orthopaedic Surgeons, Chicago, 1994.
  • 65. Ebramzadeh, E.; Sarmiento, A.; McKellop, H. A.; Llinas, A.; and Gogan, W.: The cement mantle in total hip arthroplasty. Analysis of long-term radiographic results. J Bone Joint Surgery, 76A (1): 77-87, 1994.
  • 66. Frey, C.; Halikus, N. M.; Vu-Rose, T.; and Ebramzadeh, E.: A review of ankle arthrodesis: predisposing factors to nonunion. Foot Ankle Int, 15(11): 581-4, 1994.
  • 67. Funk, G. F.; Stanley, R. B. J.; McKellop, H. A.; and Lu, B.: Motion observed across maxillary continuity defects stabilized with plates and screws. Archives Otolaryngology-Head Neck Surgery, 120(2): 187-194, 1994.
  • 68. McKellop, H. A.: Wear Modes, Mechanisms, Damage and Debris, Separating Cause from Effect in the Wear of Total Hip Repacements, Chapter 2 in Total Hip Revision Surgery. Edited by J. Galante, A. Rosenberg and J. Callaghan, Raven Press, New York, 21-39, 1994.
  • 69. McKellop, H. A.; Llinas, A.; and Sarmiento, A.: Effects of tibial malalignment on the knee and ankle. Orthop Clinics of North Aericam, 25 (3): 415-423, 1994.
  • 70. Park, S. H.; Cassim, A.; Llinas, A.; McKellop, H. A.; and Sarmiento, A.: A technique for producing controlled closed fractures in a rabbit model. J. Orthop. Research., 12: 732-736, 1994.
  • 71. Zionts, L. E.; McKellop, H. A.; and Hathaway, R.: Torsional strength of pin configurations used to fix supracondylar fractures of the humerus in children. J Bone Joint Surgery, 76-A (2): 253-256, 1994.
  • 72. Campbell, P. A.; Ma, S.; Yeom, B.; McKellop, H. A.; Schmalzried, T. P.; and Amstutz, H. C.: Isolation of predominantly submicron sized UHMWPE wear particles from periprosthetic tissues. Journal of Biomedical Materials Research, 29(1): 127-131, 1995.
  • 73. Grecula, M. J.; Grigoris, P.; Schmalzried, T. P.; Dorey, F. J.; Campbell, P. A.; and Amstutz, H. C.: Endoprostheses for osteonecrosis of the femoral head. A comparison of four models in young patients. Int Orthop, 19(3): 137-43, 1995.
  • 74. Lemons, J. E.; Bankston, A. B.; Chillag, K. J.; Hozack, W.; Lombardi, A. V., Jr.; McKellop, H. A.; Stulberg, S. D.; and Wright, T. M.: Symposium: the relationship between polyethylene quality and wear. Contemporary Orthopaedics, 30 (1): 65-79, 1995.
  • 75. Lovasz, G.; Llinas, A.; Benya, P. D.; Bodey, B.; McKellop, H. A.; Luck, J. V., Jr.; and Sarmiento, A.: Effects of valgus tibial angulation on cartilage degeneration in the rabbit knee. J Orthop Res, 13(6): 846-853, 1995.
  • 76. McKellop, H. A.: Gamma radiation-induced wear depends on application. Orthopaedics Today. 15 (8), 1995
  • 77. McKellop, H. A.; Campbell, P. A.; Park, S. H.; Schmalzried, T. P.; Grigoris, P.; Amstutz, H. C.; and Sarmiento, A.: The origin of sub-micron polyethylene wear debris in total hip arthroplasty. The John Charnley Award Paper, Proceedings of the Hip Society, Clinical Orthopaedic and Related Research, 311: 1-18, 1995.
  • 78. McKellop, H. A.; Campbell, P. A.; Park, S. H.; Schmalzried, T. P.; Grigoris, P.; Amstutz, H. C.; and Sarmiento, A.: The origin of submicron polyethylene wear debris in total hip arthroplasty. The John Charnley Award Paper, Proceedings of the Hip Society, Clinical Orthopaedics and Related Research, 311: 3-20, 1995.
  • 79. Park, S. H.; Llinas, A.; and Goel, V. K.: Hard Tissue Replacements: Bone Repair and Joint Implants. In The Biomedical Engineering Handbook, Edited by Bronzino, J. D., CRC Press Inc., Boca Raton, FL, 1995.
  • 80. Sarmiento, A.; Sharpe, F. E.; Ebramzadeh, E.; Normand, P.; and Shankwiler, J.: Factors influencing the outcome of closed tibial fractures treated with functional bracing. Clin Orthop Relat Res, (315): 8-24, 1995.
  • 81. Schmalzried, T. P., and Campbell, P. A.: Isolation and characterization of debris in membranes around total joint prostheses [letter; comment]. Journal of Bone and Joint Surgery. American Volume, 77A(10): 1625-1626, 1995.
  • 82. Schmalzried, T. P.; Campbell, P. A.; Brown, I. C.; Schmitt, A. K.; and Amstutz, H. C.: Polyethylene wear particles generated in vivo by total knee replacements compared to total hip replacements. Trans Orthop Res Soc, 20: 163, 1995.
  • 83. Amstutz, H. C.; Campbell, P. A.; McKellop, H. A.; Schmalzreid, T. P.; Gillespie, W. J.; Howie, D.; Jacobs, J.; Medley, J.; and Merritt, K.: Metal on metal total hip replacement workshop consensus document. Clinical Orthopaedic and Related Research, 329S: S297-S303, 1996.
  • 84. Campbell, P. A., and Kirchen, M. E.: Microscopic methods to characterize the ultra high molecular weight polyethylene particles associated with periprosthetic bone loss: A review. Cells and Materials, 5(4): 385-402, 1996.
  • 85. Campbell, P. A.; Doorn, P.; Dorey, F. J.; and Amstutz, H. C.: Wear and morphology of ultra-high molecular weight polyethylene wear particles from total hip replacements. Proc Inst Mech Eng [H], 210(3): 167-74, 1996.
  • 86. Doorn, P. F.; Campbell, P. A.; and Amstutz, H. C.: Metal versus polyethylene wear particles in total hip replacements. A review. Clinical Orthopaedics and Related Research, 329 Suppl: S206-16, 1996.
  • 87. Doorn, P. F.; Mirra, J. M.; Campbell, P. A.; and Amstutz, H. C.: Tissue reaction to metal on metal total hip prostheses. Clinical Orthopaedics and Related Research, 329 Suppl: S187-205, 1996
  • 88. Engel, P. A.; Clark, E. S.; McKellop, H. A.; Park, S. H.; Thyagarajan, K.; Zhao, Z.; Campbell, P. A.; and Wieting, D. W.: Surface and edge wear of Bjork-Shiley Delrin heart valve discs. Journal of Heart Valve Disease, 5 Suppl. II: 190-205, 1996.
  • 89. Jacobs, J. J.; Skipor, A. K.; Doorn, P. F.; Campbell, P. A.; Schmalzried, T. P.; Black, J.; and Amstutz, H. C.: Cobalt and chromium concentrations in patients with metal on metal total hip replacements. Clinical Orthopaedics and Related Research, 329 Suppl: S256-63, 1996.
  • 90. Lester, D. K., and Campbell, P. A.: 100-year-old patient with pressfit prosthesis: A postmortem retrieval study. American Journal of Orthopedics, 25(1): 30-34, 1996.
  • 91. Lieberman, J. R.; Kay, R. M.; Hamlet, W. P.; Park, S. H.; and Kabo, J. M.: Wear of the polyethylene liner-metallic shell interface in modular acetabular components: An in vitro analysis. J. Arthroplasty, 11(5): 602-608, 1996.
  • 92. Lu, Z.; Ebramzadeh, E.; and McKellop, H. A.: Debonding at the cement interfaces of total hip arthroplasty femoral components. J. Orthop. Res., 14(2): 238-244, 1996.
  • 93. Lu, Z.; Ebramzadeh, E.; McKellop, H. A.; and Sarmiento, A.: Stable partial debonding of the cement interfaces indicated by a finite element model of a total hip prosthesis. J Orthop Res, 14(2): 238-44, 1996.
  • 94. Mai, M. T.; Schmalzried, T. P.; Dorey, F. J.; Campbell, P. A.; and Amstutz, H. C.: The contribution of frictional torque to loosening at the cement-bone interface in Tharies hip replacements. Journal of Bone and Joint Surgery. American Volume, 78A(4): 505-11, 1996.
  • 95. McKellop, H. A.: What are the prevalent wear mechanisms? In: Implant Wear, The Future of Total Joint Replacement. Edited by T. Wright and S. Goodman, American Academy of Orthopaedic Surgeons, Rosemont, IL, 91-94 , 1996.
  • 96. McKellop, H. A.: Does gamma radiation speed or slow wear? The AAOS Bulletin, 10-11, April, 1996.
  • 97. McKellop, H. A. et al.: In vivo wear of three types of metal on metal hip prostheses during two decades of use. Clin Orthop Relat Res, (329 Suppl): S128-40, 1996.
  • 98. McKellop, H. A.; Milligan, H. L.; and Röstlund, T.: Long-term biostability of polyacetal (Delrin) implants. J Heart Valve Dis, 5 Suppl II: 238-242, 1996.
  • 99. McKellop, H. A.; Park, S. H.; Chiesa, R.; Doorn, P.; Lu, B.; Normand, P.; Grigoris, P.; and Amstutz, H. C.: In-vivo wear of 3 types of metal-metal hip prosthesis during two decades of use. Clinical Orthopaedics and Related Research, 329S: 128-140, 1996.
  • 100. McKellop, H. A.; Röstlund, T. V.; Ebramzadeh, E.; and Sarmiento, A.: Wear of titanium 6-4 alloy in laboratory tests and in retrieved human joint replacements, in STIP 1272 Medical Applications of Titanium and Its Alloys. Edited by S.A. Brown and J.E. Lemons, ASTM, West Conshohocken, 266-293, 1996.
  • 101. Sarmiento, A.; McKellop, H. A.; Llinas, A.; Park, S. H.; Lu, B.; Stetson, W.; and Rao, R.: Effect of loading and fracture motions on diaphyseal tibial fractures. J. Orthop. Res., 14(1): 80-84, 1996.
  • 102. Shen, F.; McKellop, H. A.; and Salovey, R.: Irradiation of chemically crosslinked ultrahigh molecular weight polyethlene. J. Polymer Science: Part B. Polymer Physics, 34: 1063-1077, 1996.
  • 103. Amstutz, H. C.; Noordin, S.; Campbell, P. A.; and Schmalzried, T. P.: Precision Fit Surface Hemiarthroplasty for Femoral Head Osteonecrosis. In Osteonecrosis: Etiology, Diagnosis, and Treatment, pp. 373-383. Edited by Urbaniak, J. R., and Jones, J. P., Jr., 373-383, Rosemont IL, American Academy of Orthopaedic Surgeons, 1997.
  • 104. Ashworth, C. R.; Hansraj, K. K.; Todd, A. O.; Dukhram, K. M.; Ebramzadeh, E.; Boucree, J. B.; and Hansraj, M. S.: Swanson proximal interphalangeal joint arthroplasty in patients with rheumatoid arthritis. Clin Orthop Relat Res, (342): 34-7, 1997.
  • 105. Billi, F.; and Santulli, C.: Thermal fatigue in ceramic plating on cutting tools by acoustic emission. Matériaus et Tecniques, (in French) 9-10, 27-31, 1997.
  • 106. Dorey, F. J., and McKellop, H. A.: Long-term evaluation of total hip arthroplasty: the need for survivorship analysis. In Total Hip Arthoplasty Outcomes, Edited by G. Finerman, F. Dorey, P. Grigoris and H. A. McKellop, 275-281, Churchill Livingstone, New York, 275-281, 1997.
  • 107. Finerman, G.; Dorey, F. J.; Grigoris, P.; and McKellop, H. A.: Total Hip Arthroplasty Outcomes. Edited, Churchill Livingstone, New York, 1997.
  • 108. Hansraj, K. K.; Ashworth, C. R.; Ebramzadeh, E.; Todd, A. O.; Griffin, M. D.; Ashley, E. M.; and Cardilli, A. M.: Swanson metacarpophalangeal joint arthroplasty in patients with rheumatoid arthritis. Clin Orthop Relat Res, (342): 11-5, 1997.
  • 109. Lu, Z., and McKellop, H. A.: Effects of cement creep on stem subsidence and stresses in the cement mantle of a total hip replacement. J Biomed Materials Research, 34: 221-226, 1997.
  • 110. Lu, Z., and McKellop, H. A.: Frictional heating of bearing materials tested in a hip joint wear simulator. Engineering in Medicine, Proc Instn Mech Engrs., 211, Part H: 101-108, 1997.
  • 111. Maxian, T. A.; Brown, T. D.; Pedersen, D. R.; McKellop, H. A.; Lu, B.; and Callaghan, J. J.: Finite element analysis of acetabular wear in THA: Recent model extensions to address validation and backing/fixation influences. Clin Orthop. Rel. Res,, 344: 111-117, 1997.
  • 112. Sarmiento, A.; Ebramzadeh, E.; Normand, P.; Llinas, A.; and McKellop, H. A.: The stainless steel and titanium alloy femoral prostheses. In Total Hip Arthroplasty Outcomes, edited by Finerman, G., Dorey, F., Grigoris, P., and McKellop, H. A., Chruchill Livingstone, New York, 41-54, 1997.
  • 113. Schmalzried, T. P.; Campbell, P. A.; Schmitt, A. K.; Brown, I. C.; and Amstutz, H. C.: Shapes and dimensional characteristics of polyethylene wear particles generated in vivo by total knee replacements compared to total hip replacements. Journal of Biomedical Materials Research, 38(3): 203-10, 1997.
  • 114. Thordarson, D. B.; Kumar, P. J.; Hedman, T. P.; and Ebramzadeh, E.: Effect of partial versus complete plantar fasciotomy on the windlass mechanism. Foot Ankle Int, 18(1): 16-20, 1997.
  • 115. Thordarson, D. B.; Motamed, S.; Hedman, T.; Ebramzadeh, E.; and Bakshian, S.: The effect of fibular malreduction on contact pressures in an ankle fracture malunion model. J Bone Joint Surg Am, 79(12): 1809-15, 1997.
  • 116. Vu-Rose, T.; Ebramzadeh, E.; Lane, C. S.; and Kuschner, S. H.: The Allen test. A study of inter-observer reliability. Bull Hosp Jt Dis, 56(2): 99-101, 1997.
  • 117. Billi, F.; Paracchini, L., Annicchiarico, D.; and Agliati, M.: Evaluation of compression strength on titanium dental implants. La Quintessenza Odontotecnica, (in Italian). 15(1): 71-79, 1998.
  • 118. Doorn, P. F.; Campbell, P. A.; Worrall, J.; Benya, P. D.; McKellop, H. A.; and Amstutz, H. C.: Metal wear particle characterization from metal on metal total hip replacements: Transmission electron microscopy study of periprosthetic tissues and isolated particles. Journal of Biomedical Materials Research, 42(1): 103-111, 1998.
  • 119. Lester, D. K.; Campbell, P. A.; Ehya, A.; and Rude, R. K.: Assessment of press-fit hip femoral components retrieved at autopsy. Orthopedics, 21(1): 27-33, 1998.
  • 120. Lovasz, G.; Llinas, A.; Benya, P. D.; Park, S. H.; Sarmiento, A.; and Luck, J. V. Jr.: Cartilage changes caused by a coronal surface stepoff in a rabbit model. Clinical Orthopaedics and Related Research, 354: 224-234, 1998.
  • 121. McKellop, H. A.: Assesment of Wear of Materials for Artificial Joints. Chapter 16 The Adult Hip. Edited by J. Calaghan, A. Rosenberg and H. Rubash, Lippencott-Raven, New York, 231-246, 1998.
  • 122. McKellop, H. A.: Roundtable Discussion on Polyethylene Wear. In Orthpaedics Today, pp. 35-51. Edited by Schmalzreid, T., 35-51, 1998.
  • 123. Park, S. H.; McKellop, H. A.; Lu, B.; Chan, F.; and Chiesa, R.: Wear Morphology of Metal-Metal Implants: Hip simulator tests compared to clinical retrievals. ASTM, STP 1346: Symposium on Alternative Bearing Surfaces in Total Joint Replacement,. Edited by J. Jacobs and T. Craig. American Society for Testing and Materials, West Conshohocken, 129-143, 1998.
  • 124. Park, S. H.; O'Connor, K.; McKellop, H. A.; and Sarmiento, A.: The influence of active shear or compressive motion on fracture-healing. J Bone and Joint Surgery, 80-A (6): 868-878, 1998.
  • 125. Roundtable Discussion on Polyehylene Wear. Edited by Schmalzried, T. P., Orthopaedics Today, 18(6), 35-51, 1998. (Book chapters & non-peer reviewed)
  • 126. Schmalzreid, T. P.; Clarke, I.; and McKellop, H. A.: Bearing Surface. In The Adult Hip. Edited by J. Calaghan, A. Rosenberg and H. Rubash, Lippencott-Raven, New York, 247-266, 1998.
  • 127. Schmalzried, T. P.; Dorey, F. J.; and McKellop, H. A.: The multifactorial nature of polyethylene wear in Vivo., Commentary. J. Bone and Joint Surgery, 80A (8): 1234-1241, 1998.
  • 128. Shen, F. W.; McKellop, H. A.; and Salovey, R.: Morphology of chemically crosslinked ultrahigh molecular weight polyethylene. J Biomedical Materials Research, 41(1): 71-78, 1998.
  • 129. Singer, G.; Ebramzadeh, E.; Jones, N. F.; and Meals, R.: Use of the Taguchi method for biomechanical comparison of flexor-tendon-repair techniques to allow immediate active flexion. A new method of analysis and optimization of technique to improve the quality of the repair. J Bone Joint Surg Am, 80(10): 1498-506, 1998.
  • 130. Yeom, B.; Yu, Y.-J.; McKellop, H. A.; and Salovey, R.: The profile of oxidation in irradiated polyethylene. J. Polymer Science, Polymer Chemistry, 36: 329-339, 1998.
  • 131. Zionts, L. E.; Ebramzadeh, E.; and Stott, N. S.: Complications in the use of the Bailey-Dubow extensible nail. Clin Orthop Relat Res, (348): 186-95, 1998.
  • 132. Campbell, P. A.; McKellop, H. A.; Alim, R.; Mirra, J.; Nutt, S.; Dorr, L.; and Amstutz, H. C.: Metal-on-Metal Hip Replacements: Wear Performance and Cellular Response To Wear Particles. In Cobalt-Base Alloys for Biomedical Applications, ASTM STP 1365, pp. 193-209. Edited by Disegi, J. A.; Kennedy, R. L.; and Pilliar, R., 193-209, West Conshohocken, PA,, American Society for Testing and Materials, 1999.
  • 133. Campbell, P. A.; McKellop, H. A.; Alim, R.; Nutt, S.; Dorr, L.; and Amstutz, H. C.: Metal-metal hip replacements: Wear performance and celluar response to wear particles. In Cobalt Based Alloys for Biomedical Applications, ASTM STP 1365, edited by J.A Disegi, R. L. Kennedy and R. Pilliar, ASTM West Conshohocken, 193-209, 1999.
  • 134. Liao, P. S.; Benya, P. D.; and McKellop, H. A.: Effect of protein lubrication on the wear properties of materials for prosthetic joints. J. Biomedical Materials Research, Applied Biomaterials 48 (4): 465-473, 1999.
  • 135. Llinas, A.; Sarmiento, A.; Ebramzadeh, E.; Park, S. H.; Campbell, P. A.; and McKellop, H. A.: Mechanisms of failure in hips with an uncemented, all polyethylene socket. Clinical Orthopaedics and Related Research, 362: 145-155, 1999.
  • 136. Lu, Z.; and McKellop, H. A.: Potential thermal artifacts in hip joint wear simulators. J Biomed. Mater. Res., Applied Biomaterials, 48 (4): 458-464, 1999.
  • 137. McKellop, H. A.; Shen, F. W.; Campbell, P. A.; and Ota, T.: Effect of molecular weight, calcium stearate, and sterilization method on the wear of ultra high molecular weight polyethylene acetabular cups in a hip joint simulator. J. Orthop. Res., 17 (3): 329-39, 1999.
  • 138. McKellop, H. A.; Shen, F. W.; DiMaio, W.; and Lancaster, J. G.: Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls. Clinical Orthopaedic and Related Research, 369: 73-82, 1999.
  • 139. McKellop, H. A.; Shen, F. W.; Lu, B.; Campbell, P. A.; and Salovey, R.: Development of an extremely wear resistant UHMW polyethylene for total hip replacements. J Orthopaedic Research, 17 (2): 157-167, 1999.
  • 140. Park, S. H.; McKellop, H. A.; Lu, B.; Chan, F.; and Chiesa, R.: Wear Morphology of Metal-Metal Implants: Hip Simulator Tests Compared to Clinical Retrievals Alternative Bearing Surfaces in Total Joint Replacement. In Metasul: A Metal-on-Metal Bearing. Edited by Claude Rieker, Markus Winder and Urs Wyss, Hans Huber, Bern, 1999.
  • 141. Park, S. H.; O'Connor, K.; Sung, R.; McKellop, H. A.; and Sarmiento, A.: Comparison of healing processes in open osteotomy model and closed fracture model. J Orthopaedic Trauma, 13 (2): 114-120, 1999.
  • 142. Schmalzreid, T. P., and McKellop, H. A.: Manufactures work to improve polyethylene for hip prostheses. Orthopaedics Today, 19 (10), 26-31, 1999.
  • 143. Shen, F. W.; Yu, Y. J.; and McKellop, H. A.: Potential errors in FTIR measurement of oxidation in ultrahigh molecular weight polyethylene implants. J. Biomedical Materials Res. J. Applied Biomaterials, 48 (93): 203-210, 1999.
  • 144. Yu, Y.-J.; Shen, F.-W.; McKellop, H. A.; and Salovey, R.: Hydroperoxide formation in irradiated polyethylene. J. Polymer Science, Part.A., Polymer Chemistry, 37: 3309-3316, 1999.
  • 145. Zahiri, C. A.; Schmalzried, T. P.; Ebramzadeh, E.; Szuszczewicz, E. S.; Salib, D.; Kim, C.; and Amstutz, H. C.: Lessons learned from loosening of the McKee-Farrar metal-on-metal total hip replacement. J Arthroplasty, 14(3): 326-32, 1999.
  • 146. Beaulé, P. E.; Campbell, P. A.; and Amstutz, H. C.: Metallosis and metal-on-metal bearings [letter; comment]. J Bone Joint Surg Am, 82(5): 751-2, 2000.
  • 147. Billi, F.; Chiesa, R.; Rondelli, G.; Cigada, A.; Vicentini, B.; and Stroosnijder, M.F.: Evaluation of nickel release from innovative steels for orthopaedics. Biomateriali, (in Italian). 14(2): 11-12, 2000.
  • 148. Campbell, P. A.; Mirra, J.; Doorn, P.; Mills, B.; Alim, R.; and Catelas, I.: Histopathology of Metal-on-Metal Hip Joint Tissues. In World Tribology Forum in Arthroplasty, pp. 167-180. Edited by Rieker, C.; Oberholzer, S.; and Wyss, U., 167-180, Gottingen, Hans Huber, 2000.
  • 149. Campbell, P. A.; Mirra, J.; and Amstutz, H. C.: Viability of femoral heads treated with resurfacing arthroplasty. J Arthroplasty, 15(1): 120-2, 2000.
  • 150. McKellop, H. A.: Out of the Laboratory and into the Patient (Roundtable discussion on new crosslinked polyethylenes). In Orthopaedics Today, pp. 50-68. Edited, 50-68, 2000.
  • 151. McKellop, H. A.; Shen, F. W.; Lu, B.; Salovey, R.; and Campbell, P. A.: The effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene. A hip simulator study. J. Bone and Joint Surgery, 82-A (12): 1708-1725, 2000.
  • 152. Milosev, L.; Antolic, V.; Cor, A.; Herman, S.; Pavlovcic, V.; and Campbell, P. A.: Extensive metallosis and necrosis in failed prostheses with cemented titanium-alloy stems and ceramic heads. J Bone Joint Surg Br, 82(3): 352-7, 2000.
  • 153. Park, S. H.; Llinas, A.; and Goel, V. K.: Hard Tissue Replacements: Bone Repair and Joint Implants. In Biomedical Engineering Handbook 2nd Edition. Edited by Bronzino, J. D., CRC Press Inc., Boca Raton, FL, 2000.
  • 154. Roundtable Discussion on new crosslinked polyethylenes. Orthopaedics Today, "Out of the Laboratory and into the Patient", 20 (2), 50-68, February, 2000. (Book Chapters and non-peer reviewed)
  • 155. Schmalzried, T. P.; Shepherd, E. F.; Dorey, F. J.; Jackson, W. O.; de la Rosa, M.; Fa'vae, F.; McKellop, H. A.; McClung, C. D.; Martell, J.; Moreland, J. R.; and Amstutz, H. C.: Wear is a function of use, not time. The John Charnley Award Paper. Clinical Orthopaedic and Related Research, 381: 36-46, 2000.
  • 156. Scott, D. L.; Campbell, P. A.; McClung, C. D.; and Schmalzried, T. P.: Factors contributing to rapid wear and osteolysis in hips with modular acetabular bearings made of hylamer. J Arthroplasty, 15(1): 35-46 [MEDLINE record in process], 2000.
  • 157. Walker, P. S.; Blunn, G. W.; Perry, J. P.; Bell, C. J.; Sathasivam, S.; Andriacchi, T. P.; Paul, J. P.; Haider, H.; and Campbell, P. A.: Methodology for long-term wear testing of total knee replacements. Clin Orthop, 372(372): 290-301., 2000.
  • 158. Beaulé, P. E.; Campbell, P. A.; Mirra, J.; Hooper, J. C.; and Schmalzried, T. P.: Osteolysis in a cementless, second generation metal-on-metal hip replacement. Clin Orthop, 386(386): 159-65., 2001.
  • 159. Beaulé, P. E.; Schmalzried, T. P.; Campbell, P. A.; Dorey, F. J.; and Amstutz, H. C.: Duration of symptoms and outcome of hemiresurfacing for hip osteonecrosis. Clin Orthop, (385): 104-17., 2001.
  • 160. Berry, D. J.; Barrack, R. L.; McKellop, H. A.; and Maloney, W. J.: Contemporary issues in total hip arthroplasty. Roundtable Discussion. American Journal of Orthopaedics, 30 (8): 626-632, 2001.
  • 161. Clarke, I. C.; Chan, F. W.; Essner, A.; Good, V.; Kaddick, C.; Lappalainen, R.; Laurent, M.; McKellop, H. A.; McGarry, W.; Schroeder, D.; Selenius, M.; Shen, M. C.; Ueno, M.; Wang, A.; and Yao, J.: Multi-laboratory simulator studies on effects of serum proteins on PTFE cup wear. Wear, 250: 188-198, 2001.
  • 162. Greenbaum, B.; Zionts, L. E.; and Ebramzadeh, E.: Open fractures of the forearm in children. J Orthop Trauma, 15(2): 111-8, 2001.
  • 163. Lovasz, G.; Park, S. H.; Ebramzadeh, E.; Benya, P. D.; Llinas, A.; Bellyei, A.; Luck, J. V., Jr.; and Sarmiento, A.: Characteristics of degeneration in an unstable knee with a coronal surface step-off. J Bone Joint Surg Br, 83(3): 428-36, 2001.
  • 164. Mallory, A. E.; Ebramzadeh, E.; and Dorr, L.: The Relationship Between the Fractuer Tolerance of Femoral Cortex and Bone Density by QCT. 2001.
  • 165. McKellop, H. A.: Bearing surfaces in total hip replacements: State of the art and future developments. American Academy of Orthopaedic Surgeons, Instructional Course Lectures, Vol. 50, 2001.
  • 166. McKellop, H. A.; Röstlund, T. V.; Ebramzadeh, E.; and Sarmiento, A.: Wear of titanium 6-4 alloy in laboratory tests and in retrieved human joint replacements. In Titanium in Medicine, Edited by D. Brunette, P. Tengvall, M. Textor and P. Thomsen, Springer Verlag, Heidelberg, 747-770, 2001.
  • 167. Park, S. H.; Silva, M.; Park, J. S.; Ebramzadeh, E.; and Schmalzried, T. P.: Cement-cement interface strength: influence of time to apposition. J Biomed Mater Res, 58(6): 741-6, 2001.
  • 168. Rondelli, G.; Cigada, A.; Billi, F.; Chiesa, R.; Vicentini, B.; and micelli, T.: Effetto dello stampaggio sulla resistenza alla corrosione localizzata di acciai ad alto tenore di azoto per applicazioni ortopediche. Biomateriali, (in Italian). Edited by Piconi, C., ENEA, 99, 325-330, May, 2000.
  • 169. Sathasivam, S.; Walker, P. S.; Campbell, P. A.; and Rayner, K.: The effect of contact area on wear in relation to fixed bearing and mobile bearing knee replacements. J Biomed Mater Res, 58(3): 282-90, 2001.
  • 170. Thordarson, D. B.; Rudicel, S. A.; Ebramzadeh, E.; and Gill, L. H.: Outcome study of hallux valgus surgery--an AOFAS multi-center study. Foot Ankle Int, 22(12): 956-9, 2001.
  • 171. Valente, M.; and Billi, F.: Micromechanical modification induced by cyclic thermal stress on metal matrix composites for automotive applications. Composite: Part B, 32/6, 529-533, 2001.
  • 172. Beaulé, P. E.; Campbell, P. A.; Walker, P. S.; Schmalzried, T. P.; Dorey, F. J.; Blunn, G. W.; Bell, C. J.; Yahia, L.; and Amstutz, H. C.: Polyethylene wear characteristics in vivo and in a knee stimulator. J Biomed Mater Res, 60(3): 411-9., 2002.
  • 173. Campbell, P. A.; Wang, M.; Amstutz, H. C.; and Goodman, S. B.: Positive cytokine production in failed metal-on-metal total hip replacements. Acta Orthop Scand, 73(5): 506-12., 2002.
  • 174. Kurtz, S. M. et al.: Interlaboratory validation of oxidation-index measurement methods for UHMWPE after long-term shelf aging. J Biomed Mater Res, 63(1): 15-23, 2002.
  • 175. Leet, A. I.; Frisancho, J.; and Ebramzadeh, E.: Delayed treatment of type 3 supracondylar humerus fractures in children. J Pediatr Orthop, 22 (2): 203-7, 2002.
  • 176. Looney, R. J. et al.: Volumetric computerized tomography as a measurement of periprosthetic acetabular osteolysis and its correlation with wear. Arthritis Res, 4(1): 59-63., 2002. 177. Park, S. H.; Silva, M.; Bahk, W. J.; McKellop, H. A.; and Lieberman, J. R.: Effect of repeated irrigation and debridement on fracture healing in an animal model. .J Orthop. Res., 20 (6): 1197-1204, 2002.
  • 178. Pereira, D. S.; Kvitne, R. S.; Liang, M.; Giacobetti, F. B.; and Ebramzadeh, E.: Surgical repair of distal biceps tendon ruptures: a biomechanical comparison of two techniques. Am J Sports Med, 30(3): 432-6, 2002.
  • 179. Santulli, C.; and Billi, F.: Normal and off-axis compression tests of biocompatible titanium dental implants monitored by acoustic emission. Journal of Materials Science Letters. 21(9): 727-730, May, 2002.
  • 180. Shen, F. W., and McKellop, H. A.: Interaction of oxidation and crosslinking in gamma-irradiated ultrahigh molecular-weight polyethylene. J. Biomed. Mater. Res., 61: 430-439, 2002.
  • 181. Skipor, A.; Campbell, P. A.; Paterson, L.; Amstutz, H.; Schmalzried, T. P.; and Jacobs, J.: Serum and Urine Metal Levels in Patients with Metal on Metal Surface Arthroplasty. J. Mat Sci, 13: 1227-1234, 2002.
  • 182. Sundfeldt, M.; Widmark, M.; Johansson, C. B.; Campbell, P. A.; and Carlsson, L. V.: Effect of submicron polyethylene particles on an osseointegrated implant: an experimental study with a rabbit patello-femoral prosthesis. Acta Orthop Scand, 73(4): 416-24., 2002.
  • 183. Zionts, L. E., and Ebramzadeh, E.: Bone fixation in patients with osteogenesis imperfecta. Internal Fixation in Osteoporotic. Edited by An, Y. H., Thieme, New York, 2002.
  • 184. Campbell, P. A.; Urban, R. M.; Catelas, I.; Skipor, A. K.; and Schmalzried, T. P.: Autopsy analysis thirty years after metal-on-metal total hip replacement. A case report. J Bone Joint Surg Am, 85-A(11): 2218-22., 2003.
  • 185. Ebramzadeh, E.; Normand, P. L.; Sangiorgio, S. N.; Llinas, A.; Gruen, T. A.; McKellop, H. A.; and Elkins, S.: Long-term radiographic changes in cemented total hip arthroplasty with six designs of femoral components. Biomaterials, 24 (19): 3351-3343, 2003.
  • 186. Ebramzadeh, E.; Sangiorgio, S. N.; Lattuada, F.; Kang, J. S.; Chiesa, R.; McKellop, H. A.; and Dorr, L. D.: Accuracy of measurement of polyethylene wear with use of radiographs of total hip replacements. J. Bone Joint Surgery Am, Volume 85: 12, 2378-2384, 2003.
  • 187. Ebramzadeh, E.; Sangiorgio, S. N.; Longjohn, D. B.; Buhari, C. F.; Morrison, B. J.; and Dorr, L.D.: Effects of total hip arthroplasty cemented femoral stem surface finish, collar and cement thickness on load transfer to the femur. J. Appl. Biomater. Biomech., 1(1): 76-83, 2003
  • 188. Kang, J. S.; Park, S. R.; Ebramzadeh, E.; and Dorr, L. D.: Measurement of polyethylene wear in total hip arthroplasty--accuracy versus ease of use. Yonsei Med J, 44(3): 473-8, 2003.
  • 189. Liao, P. S.; McKellop, H. A.; Lu, Z.; Campbell, P. A.; and Benya, P. D.: The effect of frictional heating and forced cooling on the serum lubricant and wear of UHMW polyethylene cups against cobalt-chromium and zirconia balls. Biomaterials, 24 (18): 3047-3059, 2003.
  • 190. McKellop, H. A.: Bearing surfaces in total hip replacement: State of the art and future developments. Chapter 10 in Hip Surgery. Edited by Robert B, Bourne, Oxford University Press, Oxford, 249-278, 2003.
  • 191. McKellop, H. A.: [In Chinese] Bearing surfaces in total hip replacement: State of the art and future developments. Chapter 6 in Surgery of Artificial Hip Replacement. Edited by Xianzheng Luo and Guixing Qiu, Union Medical University Press, Beijing, 96-110, 2003.
  • 192. Park, S. H.; Llinas, A.; Goel, V. K.; and Keller, J. C.: Hard Tissue Replacements. In Biomaterials: Principals And Applications. Edited by Park, J. B., Boronzino, J. D., CRC Press Inc., Boca Raton, FL, 2003.
  • 193. Park, S. H.; O'Connor, K. M.; and McKellop, H. A.: Interaction between active motion and exogenous transforming growth factor Beta (TGFβ) during fracture repair. J. Orthopaedic Trauma, 17 (1): 2-10, 2003.
  • 194. Park, S. H.; and Silva, M.: Effect of pneumatic soft tissue compression of fracture healing in an animal model. J Bone Joint Surg, 85A(8): 1446-1453, 2003.
  • 195. Rimondini, L.; Billi, F.; Quirici, N.; and Gilliland, D.: The effect of ions release on In-Vitro fibroblast vitality ceramics, cells and tissues. Edited by A. Ravaglioli and A. Krajewsky, Vol. 9, p.75, ISBN, 88-8080-045-0, 2003
  • 196. Shen, F. W., and McKellop, H. A.: The crosslinked ultra-high molecular weight polyethylene, UHMWPE for Arthroplasty: Past, Present, and Future; Torino, Italy pages 73-86, 2003.
  • 197. Silva, M.; Kabbash, C.; Tiberi, J.; Park, S. H.; Reilly, D.; Mahoney, O. S.; and Schmalzried, T.: Surface damage on Open Box PS Modular Polyrthylene Tibial Inserts. Clinical Orthopaedics, 416: 135-144, 2003.
  • 198. Wang, J. C.; Kanim, L. E.; Yoo, S.; Campbell, P. A.; Berk, A. J.; and Lieberman, J. R.: Effect of regional gene therapy with bone morphogenetic protein-2-producing bone marrow cells on spinal fusion in rats. J Bone Joint Surg Am, 85-A(5): 905-11., 2003.
  • 199. Wu, H. C.; Shen, F. W.; Hong, X.; Chang, W. V.; and Winet, H.: Monitoring the degradation process of biopolymers by ultrasonic longitudinal wave pulse-echo technique. Biomaterials, 24(22): 3871-6, 2003.
  • 200. Amstutz, H. C.; Beaulé, P. E.; Dorey, F. J.; Le Duff, M. J.; Campbell, P. A.; and Gruen, T. A.: Metal-on-metal hybrid surface arthroplasty: two to six-year follow-up study. J Bone Joint Surg Am, 86-A(1): 28-39, 2004.
  • 201. Amstutz, H. C.; Campbell, P. A.; and Le Duff, M. J.: Fracture of the neck of the femur after surface arthroplasty of the hip. J Bone Joint Surg. Am, 86-A(9): 1874-7., 2004.
  • 202. Amstutz, H. C.; Ebramzadeh, E.; Sarkany, A.; Le Duff, M.; and Rude, R.: Preservation of bone mineral density of the proximal femur following hemisurface arthroplasty. Orthopedics, 27(12): 1266-71, 2004.
  • 203. Beaulé, P. E.; Ebramzadeh, E.; LeDuff, M. J.; Prasad, R.; and Amstutz, H. C.: Cementing a liner into a stable cementless acetabular shell: the double-socket technique. J Bone Joint Surg Am, 86-A(5): 929-34, 2004.
  • 204. Beaulé, P. E.; Le Duff, M.; Campbell, P. A.; Dorey, F. J.; Park, S. H.; and Amstutz, H. C.: Metal-on-metal surface arthroplasty with a cemented femoral component: A 7-10 year follow-up study. J Arthroplasty, December; 19(8 Suppl 3): 17-22., 2004.
  • 205. Beaulé, P. E.; Lee, J. L.; Le Duff, M. J.; Amstutz, H. C.; and Ebramzadeh, E.: Orientation of the femoral component in surface arthroplasty of the hip. A biomechanical and clinical analysis. J Bone Joint Surg Am, 86-A(9): 2015-21, 2004.
  • 206. Burnette, J. B.; Ebramzadeh, E.; Lee, J. L.; Galanti, S.; and Hoffer, M. M.: Incidence of inpatient surgeries in children and young adults with childhood orthopaedic diagnoses. J Pediatr Orthop, 24(6): 738-41, 2004.
  • 207. Campbell, P. A.; Shen, F. W.; and McKellop, H. A.: Biologic and tribologic considerations of alternative bearing surfaces. Clinical Orthopaedics and Related Research, 418: 98-111., 2004.
  • 208. Catelas, I.; Medley, J. B.; Campbell, P. A.; Huk, O. L.; and Bobyn, J. D.: Comparison of in vitro with in vivo characteristics of wear particles from metal-metal hip implants. J Biomed Mater Res, 70B(2): 167-78., 2004.
  • 209. Ebramzadeh, E.; Beaulé, P. E.; Culwell, J. L.; and Amstutz, H. C.: Fixation strength of an all-metal acetabular component cemented into an acetabular shell: a biomechanical analysis. J Arthroplasty, 19(8 Suppl 3): 45-9, 2004.
  • 210. Ebramzadeh, E.; Sangiorgio, S. N.; Longjohn, D. B.; Buhari, C. F.; and Dorr, L. D.: Initial stability of cemented femoral stems as a function of surface finish, collar, and stem size. J Bone Joint Surg Am, 86-A(1): 106-15, 2004.
  • 211. Hallab, N.; Anderson, S.; Caicedo, M.; Skipor, A.; Campbell, P. A.; and Jacobs, J. J.: Immune Responses Correlate With Serum-Metal in Metal-on-Metal Hip Arthroplasty. The Journal of Arthroplasty, 19(8; supplement 3): 88-94, 2004.
  • 212. Jacobs, J. J.; Skipor, A. K.; Campbell, P. A.; Hallab, N. J.; Urban, R. M.; and Amstutz, H. C.: Can metal levels be used to monitor metal-on-metal hip arthroplasties? J Arthroplasty, 19(8 Suppl 3): 59-65., 2004.
  • 213. Lemons, S. E.; Ebramzadeh, E.; and Kvitne, R. S.: A new technique: in vitro suture anchor fixation has superior yield strength to bone tunnel fixation for distal biceps tendon repair. Am J Sports Med., 32(2): 406-10, 2004.
  • 214. Macdonald, W.; Campbell, P. A.; Fisher, J.; and Wennerberg, A.: Variation in surface texture measurements. J Biomed Mater Res, 70B(2): 262-9., 2004.
  • 215. Park, S. H.: Letter to the Editor: Shear movement at the fracture site delays healing in a diaphyseal fracture model. J Orthop Res, 22(5): 1156-1557, 2004.
  • 216. Park, S. H., and Silva, M.: Neuromuscular Electrical Stimulation Enhances Fracture Healing: Results of an Animal Model. J Orthop Res, 22(2): 382-387, 2004.
  • 217. Sangiorgio, S. N.; Ebramzadeh, E.; Longjohn, D. B.; and Dorr, L. D.: Effects of dorsal flanges on fixation of a cemented total hip replacement femoral stem. J Bone Joint Surg Am, 86-A(4): 813-20, 2004.
  • 218. Balint, L.; Park, S. H.; Bellyei, A.; Luck, J. V. J.; Sarmiento, A.; and Lovasz, G.: Repair of steps and gaps in articular fracture models. Clin. Orthop., January; (430): 208-18, 2005.
  • 219. Davies, A. P.; Willert, H. G.; Campbell, P. A.; Learmonth, I. D.; and Case, C. P.: An Unusual Lymphocytic Perivascular Infiltration in Tissues Around Contemporary Metal-on-Metal Joint Replacements. J Bone Joint Surg Am, 87(1): 18-27, 2005.
  • 220. Ebramzadeh, E.; Billi, F.; Sangiorgio, S. N., Mattes, S.; Schmoelz, W.; and Dorr, L.: Simulation of fretting wear at orthopaedic implant interfaces. J Biomech Eng, 127(3): 357-63, 2005.
  • 221. McKellop, H. A.; Schmalzreid, T. P.; and Collier, J.: Bearing Materials Overview, in Issues in Orthopaedics, a Continuing Medical Education activity sponsored by Pfiedler ENterprises, Inc., Aurora, Colorado, 2005.
  • 222. Milosev, I.; Pisot, V.; and Campbell, P. A.: Serum levels of cobalt and chromium in patients with Sikomet metal-metal total hip replacements. J Orthop Res, 23(3): 526-35, 2005.
  • 223. Milosev, I.; Trebse, R.; Kovac, S.; Cor, A.; and Campbell, P. A.: Dissociation of the metal inlay from the polyethylene liner in an uncemented threaded cup. Arch Orthop Trauma Surg, 125(2): 134-41. Epub 2005 Jan 12., 2005.
  • 224. Shen, F. W., and McKellop, H. A.: Surface-gradient cross-linked polyethylene: Oxidation resistance and wear against smooth and roughened femoral balls. Clinical Orthopaedics and Related Research, 430: 80-88, 2005.
  • 225. Thordarson, D.; Ebramzadeh, E.; Moorthy, M.; Lee, J.; and Rudicel, S.: Correlation of hallux valgus surgical outcome with AOFAS forefoot score and radiological parameters. Foot Ankle Int, 26(2): 122-7, 2005.
  • 226. Thordarson, D. B.; Ebramzadeh, E.; Rudicel, S. A.; and Baxter, A.: Age-adjusted baseline data for women with hallux valgus undergoing corrective surgery. J Bone Joint Surg Am, 87(1): 66-75, 2005.
  • 227. Amstutz, H. C.; Beaulé, P. E.; Dorey, F. J.; Le Duff, M. J.; Campbell, P. A.; and Gruen, T. A.: Metal-on-Metal Hybrid Surface Arthroplasty. Surgical Technique. J Bone Joint Surg Am., 88 Suppl 1 Pt 2: 234-49., 2006.
  • 228. Beaulé, P. E.; Campbell, P. A.; Hoke, R.; and Dorey, F. J.: Notching of the femoral neck during resurfacing arthroplasty of the hip: a vascular study. J Bone Joint Surg Br., 88(1): 35-9., 2006.
  • 229. Beaulé, P. E.; Campbell, P. A.; Lu, Z.; Leunig-Ganz, K.; Beck, M.; Leunig, M.; and Ganz, R.: Vascularity of the arthritic femoral head and hip resurfacing. J Bone Joint Surg Am., 88 Suppl 4: 85-96., 2006.
  • 230. Campbell, P. A.; Beaulé, P. E.; Ebramzadeh, E.; Le Duff, M. J.; De Smet, K.; Lu, Z.; and Amstutz, H. C.: A study of implant failure in metal-on-metal surface arthroplasties. Clin Orthop Rel Res, 453(453): 35-46, 2006.
  • 231. Campbell, P. A.; Beaulé, P. E.; Ebramzadeh, E.; LeDuff, M. J.; De Smet, K.; Lu, Z.; and Amstutz, H. C.: The John Charnley Award: a study of implant failure in metal-on-metal surface arthroplasties. Clin Orthop Relat Res, 453: 35-46, 2006.
  • 232. Catelas, I.; Campbell, P. A.; Bobyn, J. D.; Medley, J. B.; and Huk, O. L.: Wear particles from metal-on-metal total hip replacements: effects of implant design and implantation time. Proc Inst Mech Eng [H]. 220(2): 195-208., 2006.
  • 233. Ebramzadeh, E.; Sangiorgio, S. N.; and Clarke, I. C.: Greater Expectations and Greater Joint Loads in Modern Total Joint Arthroplasty Patients. Core Knowledge in Orthopaedics: Adult Reconstruction and Arthroplasty. Edited by Garino, J., Peredjiklian, P., Elservier, Phildelphia, PA, 2006.
  • 234. Kuschner, S. H.; Ebramzadeh, E.; and Mitchell, S.: Evaluation of elbow flexion and linel tests for cubital tunnel syndrome in asymptomatic individuals. Orthopedics, 29(4): 305-8, 2006.
  • 235. Park, S. H.; Llinas, A.; Goel, V. K.; and Keller, J. C.: In The Biomedical Engineering Handbook 3rd Edition. Biomedical Engineering Fundamentals. Edited by Bronzino, J. D., CRC Press Inc., Boca Raton, FL, 2006.
  • 236. Shahrdar, C.; Campbell, P. A.; Mirra, J.; and Dorr, L. D.: Painful metal-on-metal total hip arthroplasty. J Arthroplasty., 21(2): 289-93., 2006.
  • 237. Amstutz, H. C.; Campbell, P. A.; and Le Duff, M. J.: Metal-on-metal hip resurfacing: what have we learned? Instr Course Lect., 56: 149-61., 2007.
  • 238. Amstutz, H. C.; Le Duff, M. J.; Campbell, P. A.; and Dorey, F. J.: The effects of technique changes on aseptic loosening of the femoral component in hip resurfacing. Results of 600 Conserve Plus with a 3 to 9 year follow-up. J Arthroplasty., 22(4): 481-9., 2007.
  • 239. Beaulé, P. E.; Campbell, P. A.; and Shim, P.: Femoral head blood flow during hip resurfacing. Clin Orthop Relat Res, 456: 148-52, 2007.
  • 240. De Haan, R.; Campbell, P. A.; Reid, S.; Skipor, A. K.; and De Smet, K.: Metal ion levels in a triathlete with a metal-on-metal resurfacing arthroplasty of the hip. J Bone Joint Surg Br., 89(4): 538-41., 2007.
  • 241. De Smet, K., A.; Roel, D. H.; Edward, E.; and Pat, C.: Blood metal ions and x-ray follow up as a predictor for problems and outcome in hip resurfacing arthroplasty. In ISTA. Edited, Paris France, 2007.
  • 242. Gill, H. S.; Campbell, P. A.; Murray, D. W.; and De Smet, K. A.: Reduction of the potential for thermal damage during hip resurfacing. J Bone Joint Surg Br., 89(1): 16-20., 2007.
  • 243. Hsu, W. K.; Sugiyama, O. S.; Park, S. H.; Conduah, A.; Feeley, B. T.; Liu, N. Q.; Krenek, L.; An, D. S.; Chen, I. S.; and Lieberman, J. R.: Lentiviral-meditated BMP-2 Gene Transfer Enhances Healing of Segmental Femoral Defects in Rats. Bone, 40(4): 931-938, 2007.
  • 244. Jacobs, C. A.; Christensen, C. P.; Greenwald, A. S.; and McKellop, H. A.: Clinical performance of highly crosslinked polyethylenes in total hip arthroplasty. J. Bone Joint Surgery, 89-A: 2779-2786, 2007.
  • 245. McKellop, H. A.: The lexicon of polyethylene wear in artificial joints. Biomaterials, 28 (34): 5049-5057, 2007.
  • 246. Park, S. H.; Llinas, A.; and Goel, V. K.: Hard Tissue Replacements. In Biomaterials. Edited by Joyce Y. Wong, J. D. Bronzino,CRC Press Inc., Boca Raton, FL, 2007.
  • 247. Thordarson, D. B.; Ebramzadeh, E.; Sangiorgio, S. N.; Schnall, S. B.; and Patzakis, M. J.: Resident selection: how we are doing and why? Clin Orthop Relat Res, 459: 255-9, 2007.
  • 248. Wang, J. C.; Alanay, A.; Mark, D.; Kanim, L. E.; Campbell, P. A.; Dawson, E. G.; and Lieberman, J. R.: A comparison of commercially available demineralized bone matrix for spinal fusion. Eur Spine J, 16(8): 1233-40, 2007.
  • 249. Bengs, B. C.; Sangiorgio, S. N.; and Ebramzadeh, E.: Less range of motion with resurfacing arthroplasty than with total hip arthroplasty: in vitro examination of 8 designs. Acta Orthop, 79(6): 755-62, 2008.
  • 250. Billi, F.; Benya, P. D.; Ebramzadeh, E.; Campbell, P. A.; Chan, F.; and McKellop, H. A.: Challenges Associated With Isolation, Display and Morphological Characterzation on Metal Particles from Wear Debris. SAS Journal, 2008.
  • 251. Campbell, P. A., and Lundergan, W.: Modes of Failures: Fractures and Loosening. In Hip Resurfacing. Edited by Amstutz, H. C., Elsevier, New York, Chpt 10, p119-133, 2008.
  • 252. Campbell, P. A.; Shimmin, A.; Walter, L.; and Solomon, M.: Metal sensitivity as a cause of groin pain in metal-on-metal hip resurfacing. J Arthroplasty., 23(7): 1080-85, (epub) 2008.
  • 253. Campbell, P. A., and Takamura, K. M.: Reaction to Wear Products. In Hip Resurfacing Principles, Indications, Technique and Results, pp. 133-148. Edited by Amstutz, H. C., 133-148, Philadelphia, Saunders Elsevier, 2008.
  • 254. De Haan, R.; Campbell, P. A.; Su, E. P.; and De Smet, K. A.: Revision Experience of metal-on-metal hip resurfacing arthroplasty. J Bone Joint Surg Br., 90B: 1158-64., 2008.
  • 255. De Haan, R.; Pattyn, C.; Gill, H. S.; Murray, D. W.; Campbell, P. A.; and De Smet, K.: Correlation between inclination of the acetabular component and metal ion levels in metal-on-metal hip resurfacing replacement. J Bone Joint Surg Br., 90: 1291-97., 2008.
  • 256. De Smet, K.; De Haan, R.; Calistri, A.; Campbell, P. A.; Ebramzadeh, E.; Pattyn, C.; and Gill, H. S.: Metal ion measurement as a diagnostic tool to identify problems with metal-on-metal hip resurfacing. J Bone Joint Surg Am, 90 Suppl. 4: 202-8, 2008.
  • 257. Jacobs, J. J.; Campbell, P. A.; and Konttinen, Y.: How has the biologic reaction to wear particles changed with newer bearing surfaces? J Am Acad Orthop Surg., 16 Suppl 1: S49-55., 2008.
  • 258. Lee, J. L.; Billi, F.; Sangiorgio, S. N.; McGarry, W.; Krueger, D. J.; Miller, P. T.; McKellop, H. A.; and Ebramzadeh, E.: Wear of an experimental metal-on-metal artificial disc for the lumbar spine. Spine, 33 (6): 597-606, 2008.
  • 259. McKellop, H.A.: Bearing materials for hip, knee and spine arthroplasty, Chapter 7 in Orthopaedic Knowledge Update 9, American Academy of Orthopaedic Surgeons, 79-88, 2008.
  • 260. McKellop, H. A., and Campbell, P. A.: Bearing materials for hip, knee and spinal disk replacement. In Orthopaedic Knowledge Update, pp. 79-88. Edited by Fischgrund, J., 79-88, Rosemont, IL, American Academy of Orthopaedic Surgeons, 2008.
  • 261. McKellop, H. A., and D'Lima, D.: How have wear testing and joint simulator studies helped to discriminate among materials and designs? J. American Academy Orthopaedic Surgeons, 16: S11-S119, 2008.
  • 262. McKellop, H. A.; Ries, M.; and Schmalazried, T. P.: Surgeons, scientists discuss benefits, potential faults of highly crosslinked PE. Orthopaedics Today, 28 (10), 2008.
  • 263. Park, S. H., and Silva, M.: Intermittent Pneumatic Soft Tissue Compression Changes in Periosteal and Medullary Canal Blood Flow. J. Orthop. Res., 26: 570-577, 2008.
  • 264. Reijngoud, L. W.; Pattyn, C.; De Haan, R.; De Somer, F.; Campbell, P. A.; Gill, H. S.; and De Smet, K. A.: Does Intraoperative Cell Salvage Remove Cobalt and Chromium from Reinfused Blood? J Arthroplasty, 11: epub ahead of publication Sept, 2008.
  • 265. Sangiorgio, S. N.; Longjohn, D. B.; Lee, J. L.; Alexander, J. D.; Dorr, L.D.; and Ebramzadeh, E.: Simulation of extreme loads on the proximal femur for implant fixation assessment. J. Appl. Biomater. Biomech., 6(2): 72-80, 2008.
  • 266. Sanjee, V. S.; Cho, S. K.; Raalte, J. V.; Park, S. H.; Seo, S. W.; Chang, S. S.; Gardner, T. R.; and Lee, F. Y.: Enhancement of periprosthetic bone quality with topical hydroxyapatite-bisphosphonate composite: An experimental study, J. Bone Joint Surg. 90(10): 2189-2196, October, 2008.
  • 267. Shimmin, A.; Beaulé, P. E.; and Campbell, P. A.: Current Concepts Review: Metal-on-metal hip resurfacing. J Bone Joint Surg Am., 90: 637-54, 2008.
  • 268. Silva, M.; Luck, J. V., Jr.; Quon, D.; Young, C. R.; Chin, D. M.; Ebramzadeh, E.; and Fong, Y. J.: Inter- and intra-observer reliability of radiographic scores commonly used for the evaluation of haemophilic arthropathy. Haemophilia, 14(3): 504-12, 2008.
  • 269. Suratwala, S.; Cho, S. K.; Raalte, J. V.; Park, S. H.; Seo, S. W.; Chang, S. S.; Gardner, T. R.; and Lee, F. Y.: Enhancement of Periprosthetic Bone Quality with Topical Hydroxyapatite-Bisphosphonate Composite: An Experimental Study. J Bone Joint Surg, October; 90(10): 2189-96, 2008.
  • 270. Virk, M.; Conduah, A.; Park, S. H.; Liu, N.; Sugiyama, O.; Cuomo, A.; Kang, C.; and Lieberman, J. R.: Influence of short -term adenoviral vector and prolonged lentiviral vector mediated bone morphogenetic protein-2 expression on the quality of bone repair in a rat femoral defect model. Bone, 42(5): 921-931, 2008.
  • 271. Billi, F.; Benya, P. D.; Ebramzadeh, E.; Campbell, P. A.; Chan, F.; and McKellop, H. A.: Metal wear particles: What we know, what we don't know, and why. SAS Journal 3:133-142, 2009.
  • 272. Billi, F., and Ebramzadeh, E.: Back Wear: Effect of Surface Finish on Debris Morphology. Journal of Applied Biomaterials and Biomechanics, 2009.
  • 273. Billi, F.; Sangiorgio, S. N.; Aust, S.; and Ebramzadeh, E.: Factors Affecting Backside Fretting Wear in Total Knee Replacement Tibial Components: An In-Vitro Simulation Study. Journal of Biomedics, 2009.
  • 274. Blumenfeld, T. J.; Bargar, W. L.; and Campbell, P. A.: A Painful Metal on Metal Total Hip Arthroplasty: A Diagnostic Dilemma. J Arthroplasty, (epub) December 4, 2009.
  • 275. Campbell, P. A., and De Smet, K.: Case Studies in Implant Retrieval Analysis of Failed Hip Resurfacings (Chapter 4:1). In Hip Resurfacing Handbook. Edited by Campbell, K. D. S. a. P., UK, Woodhead, 2009.
  • 276. Campbell, P. A.; Takamura, K.; Battenberg, A.; Ebramzadeh, E.; and Nelson, S.: Clinical consequences of CoCr wear products in the hip. American Soc. Materials Medical Device Symposium, 2009.
  • 277. Campbell, P. A.; Takamura, K.; Lundergan, W.; and Amstutz, H. C.: The role of cement technique changes in implant longevity. Bull NYU Hosp. Joint Dis. 67(2): 146-153, 2009.
  • 278. Caulkins, C.; Ebramzadeh, E.; and Winet, H.: Skeletal muscle contractions uncoupled from gravitational loading directly increase cortical bone blood flow rates in vivo. J Orthop Res, 27(5): 651-6, 2009.
  • 279. Esposito, C.; Walter, W.; Campbell, P. A.; and De Smet, K.: Acoustic Phenomena in Metal-on-metal Hip Resurfacing Arthroplasties (Chapter II.2). In Hip Resurfacing Handbook. Edited by Campbell, K. D. S. a. P., UK, Woodhead, 2009.
  • 280. Esposito, C.; Walter, W. L.; and Campbell, P. A.: Squeaking in Metal-on-Metal Hip Resurfacing Arthroplasties. In Clinic Orthopaeddics and Related Research - Symposium on Complications in MM Hip Replacement. Edited, 2009.
  • 281. Gill, R., and Campbell, P. A.: Ion Level Measurements and Their Diagnostic Role (Chapter II.6). In Hip Resurfacing Handbook. Edited by Campbell, K. D. S. a. P., UK, Woodhead, 2009.
  • 282. Leslie, I.; Campbell, P. A.; Williams, S.; McKellop, H. A.; Ingham, E.; and Fisher, J.: Clinical and Experimental Edge-loading of Hip Surface Replacements. Clin Orthop Rel Res, submitted(submitted), 2009.
  • 283. Patricia, A.; Campbell, P. A.; and Takamura, K.: Biologic Responses to Metal Debris and Metal Ions (Chapter 12). In Surgery of The Hip. Edited by Lieberman, D. J. B. J. R., Elsevier, 2009.
  • 284. Reijngoud, L. W.; Pattyn, C.; De Haan, R.; De Somer, F.; Campbell, P. A.; Gill, H. S.; and De Smet, K.A.: Does intraoperative cell salvage remove cobalt and chromium from reinfused blood? J. Arthropalsty. 24: 1125-1129, 2009.
  • 285. Roidis, N. T.; Motamed, S.; Vaishnav, S.; Ebramzadeh, E.; Karachalios, T. S.; and Itamura, J.M.: The influence of the acromioclavicular joint degeneration on supraspinatus outlet impingement and the acromion shape. J. Orthopaedic Surgery (Hong Kong), 17 (3): 331-4, 2009.
  • 286. Sangiorgio, S. N.; Ebramzadeh, E.; Longjohn, D. B.; and Dorr, L. D.: The Importance of Proximal Stem Geometry and Surface Finish on The Stability of a Double -Tapered Cemented Femoral Stem. Clinical Orthopaedic and Related Research, 2009.
  • 287. Shen, F. W.; Lu, Z.; and McKellop, H. A.: The Effect of Metal Backing, Ball Diameter and Liner Thickness on the Wear of 5-Mrad Crosslinked-Remelted UHMW Polyethylene Acetabular Liner: Hip Simulator Testing and Finite Element Analysis. J. Bone and Joint Surgery, 2009.
  • 288. Vince, K. G.; Bedard, M.; and Ebramzadeh, E.: Balancing the Revision TKA: Restraint With Constraint. Arthritis and Arthoplasty: The Knee. Eds., Thomas Brown, M.D., Quanjun Cui, WiIlliam Mihalko, Saunders & Saunders, an imprint of Elsevier Inc., Philadephia, PA; Hardcover/DVD/on-line edition (19 June 2009).
  • 289. Amstutz, H. C.; Esposito, C.; and Campbell, P. A.: Long term preservation of femoral bone following hemiresurfacing. Hip Int. 20(2): 236-241, 2010.
  • 290. Bernthal, N. M.; Stavrakis, A. I.; Billi, F.; Garcia, N. C.; Cho, J.; Kreman, T.; Uslan, D.; Ge, Q.; Pulapura, S.; Moses, A.; Simon, S. I.; Cheung, A. L.; Lieberman, J. R.; Finerman, G. A.; Adams, J. S.; and Miller, L. S.: Development of a mouse model of post-arthroplasty staphylcoccus aureus infection that uses real-time in vivo imaging to evaluate the efficacy of novel antimicrobial implant coatings. Plos One, 5(9): e12580, 2010.
  • 291. Billi, F.; and Campbell, P. A.: Nanotoxicology of metal wear particles in total joint arthroplasty: A review of current concepts. Journal of Applied Biomaterials and Biomechanics, 8: 1-6, 2010.
  • 292. Billi, F.; Sangiorgio, S. N.; Aust, S.; and Ebramzadeh, E.: Material and surface factors influencing backside fretting wear in total knee replacement tibial components. J. Biomech., 43(7): 1310-1315, 2010.
  • 293. Blumenfeld, T. J.; McKellop, H. a.; Schmalzried, T. P.; and Billi, F.: Fracture of a crosslinked polyethylene liner: A multi-factorial issue. Journal of Arthroplasty, epub, August, 2010.
  • 294. Cadet, E. R.; Vorys, G. C.; Rahman, R.; Park, S. H.; Gardner, T. R.; Lee, F. Y.; Levine, W. N.; Bigliani, L. U.; and Ahmad, C. S.: Improving bone density at the rotator cuff footprint increases supraspinatus tendon failure stress in a rat model. J. Orthop. Res., 28(3): 308-314, March, 2010.
  • 295. Campbell, P. A.; Ebramzadeh, E.; Nelson, S.; Takamura, K.; De Smet, K.; and Amstutz, H.C.: Histological features of pseudotumor-like tissues from metal-on-metal hips. Clinical Orthopaedic and Related Research, 468(9): 2321-2327, 2010.
  • 296. Campbell, P. A.; Ebramzadeh, E.; Nelson, S.; Takamura, K.; De Smet, K.; and Amstutz, H.C.: Are adverse periprosthetic tissue reactions caused by high metal-on-metal wear or hypersensitivity? Clinical Orthopaedic and Related Research, 468: 2621-2627, 2010.
  • 297. De Smet, K.; Campbell, P. A.; and Gill, H. S.: Metal-on-metal hip resurfacing: a consensus from the advanced hip resurfacing course, edited by Ghent, June 2009. J. Bone Joint Surg. Br. 92(3): 335-336, 2010.
  • 298. Esposito, C.; Walter, W. L.; Campbell, P. A.; and Roques, A.: Squeaking in metal-on-metal hip resurfacing arthroplasties. Clinical Orthopaedic and Related Research, 468: 2333-2339, 2010.
  • 299. McKellop, H. A.; Campbell, P. A.; Maloney, W.; Fisher, J.; and Hofmann, A.: Bearing surfaces for THA and TKA. In Orthopaedic Knowledge Update: Hip and knee reconstruction 4, American Academy of Orthopaedic Surgeons, Rosemont, IL, 2010. (Book chapters & non-peer reviewed articles)
  • 300. Sangiorgio, S. N.; Longjohn, D. B.; Dorr, L. D.; and Ebramzadeh, E.: The influence of proximal stem geometry and surface finish on the fixation of a double-tapered cemented femoral stem. J. Biomech., 44(1): 22-27, Jan. 4, 2010.
  • 301. Vyas, S.; Ebramzadeh, E.; Behrend, C.; Silva, M.; and Zionts, L. E.: Flexion-type fractures of the proximal tibial physis: a report of five cases and review of the literature. J. Pediatr. Orthop. B., 19(6): 492-496, 2010.
  • 302. Watters, T. S.; Hallows, R. K.; Campbell, P. A.; Covington, D. B.; Vail, T. P.; and Bolognesi, M. P.: Lack of radiographic loosening signs in a hip resurfacing that failed by stem fracture. Arch. Orthop. Trauma Surg., 130(7): 835-839, 2010.
  • 303. Zionts, L. E.; Zhao, G.; Hitchcock, K.; Maewal, J.; and Ebramzadeh, E.: Has the rate of extensive surgery to treat idiopathic clubfoot declined in the United States? J. Bone Joint Surgery Am, 92(4): 882-889, 2010.
  • 304. Billi, F.: Wear debris isolation and characterization, in tribology and bearing surfaces in total joint tribology and bearing surfaces in total joint replacement, ISBN: 978-81-7895-525-4, edited by Streicher, R. M., and Wang, A., 2011. In Press.
  • 305. Ebramzadeh, E.; Campbell, P. A.; Takamura, K. M.; Lu, Z.; Sangiorgio, S. N.; Kalma, J. J.; De Smet, K. A.; and Amstutz, H. C.: Failure Modes of 433 metal-on-metal hip implants: How, Why, and wear. Orthopaedic Clinics North America. 42-2: 241-250, 2011.
  • 306. Jacobs, J. J.; and Ebramzadeh, E.: Preface current status of m/m hip resurfacing. Orthopaedic Clin. North America. 42-2: xix, 2011.
  • 307. Sangiogio, S. N.; Longjohn, D. B.; Dorr, L. D.; and Ebramzadeh, E.: Challenges in relating experimental hip implant fixation predictions to clinical observations. J. Biomech., 44(2): 235-242, 2011.
  • 308. Shen, F., W.; Lu, Z.; and McKellop, H. A.: The effects of metal backing, ball diameter and liner thickness on the wear of 5-Mrad Crosslinked-Remelted UHMW Polyethylene Acetabular Liners: Hip simulator testing and finite element analysis. Clinical Orthopaedics and Related Research, 469(2): 395, 2011.
  • 309. Takamura, K. M.; Yoon, J.; Ebramzadeh, E.; Campbell, P. A.; and Amstutz, H. C.: Incidence and significance of femoral neck narrowing in the first 500 Conserve® Plus series of hip resurfacing cases: A clinical and histological study. Orthop. Clin. North America. 42-2: 181-193, 2011.
  • 310. Bernthal, N. M.; Pribaz, J.; Stavrakis, A.; Billi, F.; Cho, J.; Ramos, R. I.; Cheung, K. P.; Francis, K.; Iwakura, Y.; and Miller, L. S.: Protective role of IL-1Β against post-arthroplasty staphylococcus aureus infection, JOR. Available on-line 28-March, 2011 (Accepted)
  • 311. Amstutz, H. C.; Jacobs, J.; and Ebramzadeh, E., (Editors): Current status of metal-on-metal hip resurfacing. An issue of Orthopedic Clinics (The Clinics: Orthopedics). 2011, In Press.
  • 312. Amstutz, H. C.; Le Duff, M. J.; Campbell, P. A.; et al: Complications after metal-on-metal hip resurfacing arthroplasty. Orthop. Clin. North America, Hip Resurfacing Update Issue, April, 2011. In Press.
  • 313. Billi, F.; Benya, P. D.; Kavanaugh, A.; Ebramzadeh, E.; Adams, J.; and McKellop, H.A.: An accurate and extremely sensitive method to separate, display and characterize wear debris. Part 1: Polyethylene particles. Clinical Orthopaedics and Related Research, January, 2011. In Press.
  • 314. Billi, F.; Benya, P. D.; Kavanaugh, A.; Adams, J.; McKellop, H.A.; and Ebramzadeh, E.: An accurate and extremely sensitive method to separate, display and characterize wear debris. Part 2: Metal and ceramic particles. Clinical Orthopaedics and Related Research, January, 2011. In Press.
  • 315. Blumenfeld, T. J.; McKellop, H. A.; Schmalzried, T. P.; and Billi, F.: Fracture of a Crosslinked Polyethylene Liner: A multi-factorial issue. Journal of Arthroplasty. In Press.
  • 316. Cadet, E.; Ahamed, C.; Park, S. H.; Gardner, T. R.; and Lee, F. Y.: Improving Bone Density at the Rotar Cuff Footprint Increases Subraspinatus Tendon Failure Stress in a Rat Model. Journal of Orthopaedic Research, 2009. In Press.
  • 317. Campbell, P. A.; and Takamura, K.: Biological responses to metal debris and metal ions. Chapter 12, Surgery of the Hip. Edited by Barry, D. J. and Lieberman, J. R. In Press.
  • 318. Lu, Z., and McKellop, H. A.: The Relation of Creep Deformation of Acrylic Bone Cement Under a Sinusoidal Load and a Constant Load with the Linear Viscoelastic Constitutive Model. Biomaterials, In Press.
  • 319. McKellop, H. A.: Distinguishing among wear modes, wear mechanisms and wear damage in prosthetic joints. In Tribology and Bearing Surfaces in Total Joint Replacements. Edited by Streicher, R. M. and Wang, A., Trans World Research Network, February, 2011. In Press.
  • 320. Park, S. H.; Llinas, A.; Goel, V. K.; and Keller, J. C.: Hard tissue replacements Part 1: Bone Repair and Joint Replacements: In The Biomedical Engineering Handbook 4th Edition, Biomedical Engineering Fundamentals. In Press.
  • 321. Sangiorgio, S. N.; Sheikh, H.; Borkowski, S. L.; Khoo, L.; Warren, C. R.; and Ebramzadeh, E.: Comparison of three posterior dynamic stabilization devices. Spine (Phila., Pa., 1976), 2011; In Press.
  • 322. Virk, M.; Sugiyama, O.; Park, S. H.; Gambhir, S.; Adams, D.; Drissi, H.; and Lieberman, J.: Same Day Ex-Vivo Regional Gene Therapy: A novel strategy to enhance bone repair, molecular therapy. In Press.
  • 323. Watters, T. S.; Hallows, R. K.; Campbell, P. A.; Billi, F.; Covington, D. B.; and Vail, T. P.: Lack of Radiographic Loosening Signs in a Hip Resurfacing That Failed by Stem Fracture. Arch Orthop Trauma Surg, July 2009. In Press.
  • 324. Amstutz, H. C.; Takamura, K.; Lu, Z.; Campbell, P. A.; and Ebramzadeh, E.: Wear analysis of 29 Conserve Plus® Metal-on-Metal Hip Resurfacing retrievals and relationship with "Adverse Local Tissue Reaction", JBJS America, January, 2011. (Submitted)
  • 325. Bernthal, N. M.; Pribaz, J. R.; Billi, F.; Cho, J. S.; Ramos, R. I.; Cheung, A. L.; Francis, K. P.; and Miller, L.S.: Mouse model of chronic post-orthoplasty infection: noninvasive in vivo bioluminescence imaging to monitor bacterial burden for long-term study. JOR. (Submitted)
  • 326. Tiberi, J.; Billi, F.; and Schmalzried, T. P.: Single-Surgeon outcomes of hip arthroplasty with large diameter metal-metal bearings. JBJS, America. (Submitted)
  • 327. Zang, D.; Kavanugh, A.; and Billi, F.: A new method for shape and texture classification of orthopaedic wear nanoparticles, JABB. (Submitted)
Back to: Los Angeles Orthopaedic Hospital Alliance with the University of California Los Angeles - Research

Home | Find a Doctor | Locations | Directions | Services | Patients | Volunteering | About Us | Join List | Events | Contact LAOH

2400 S. Flower St. Los Angeles, CA 90007 (213) 742-1000 Copyright © 2011 Orthopaedic Hospital. All rights reserved.
Privacy | Feedback | Site Map | Contact Us